User Manual

Table Of Contents

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Matrix Software 78

Tools menu

Assign Device Icons — Displays the complete set of input and

output device icons. You can drag any of these icons to the input and

output boxes.

Edit Device Palette — Allows you to add your own device icon

graphics.

Mute-Outputs settings — Displays the Mute Adjust screen, from

which you can mute each output.

EDID settings — Displays the EDID Configuration dialog box

(see figure 48), from which you can select a pre-programmed

resolution and refresh rate for an input and save the output resolution

of the monitor connected to output 1 to one of the user-defined

locations.

Figure 48. EDID Configuration Dialog Box

NOTES:

• EDID communicates video display information, including native resolution and

vertical interval refresh rate requirements, to the input. The input device then

outputs the optimal video format for the output (such as a display) based on the

provided EDID data, ensuring proper video image quality. This communication

takes place over the Display Data Channel (DDC).

• In the EDID Conﬁguration window, the EDID data can come from either an active

output or be set to a speciﬁed value.

Update Firmware ... — Allows you to replace the firmware that is coded on the control

board in the switcher without taking the switcher out of service, opening the switcher

enclosure, and replacing the firmware chip set (see Updating Firmware on page 72).

IP Options — Allows you to set IP options (see IP Settings/Options Window on

page 67).