User Manual
Table Of Contents
- DMS Configurable Digital Video Matrix Switchers
- Safety Instructions
- FCC Class
- Contents
- Introduction
- Installation
- Operation
- Programming Guide
- Matrix Software
- HTML Operation
- Installation
- Operation
- Programming Guide
- Matrix Software
- HTML Operation
- Maintenance and Modifications
- Ethernet Connection
- Warranty and Contact Info
DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Matrix Software 72
Updating Firmware
The firmware upgrade utility provides a way to replace the firmware that is coded on the
control board in the switcher without taking the switcher out of service.
Update the switcher firmware as follows:
1. Visit the Extron website, www.extron.com, click Download (see figure 41).
3
2
3
1
1
Figure 41. Location of Firmware Upgrade Files
2. Click Firmware.
3. Select the appropriate firmware file (such as DMS Series) to download and click
Download.
4. Enter the requested personal information and then click Download to copy the firmware
to your computer.
5. Click Run twice (see figure 42 (
a
) on the next page). The PC downloads the firmware
update from the Extron website and starts the Extron Installation Program to extract the
firmware file.
6. Click Next (
b
). The program extracts the firmware files and places them in a folder
identified in the InstallShield Wizard window. Note the folder to which the firmware file is
saved.
7. Click Finish to exit the program (
c
).