User Manual

Command and Response Table for SIS Commands (continued)
DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Programming Guide 52
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
EDID commands
NOTES:
• EDID communicates video display information, including native resolution and vertical interval refresh rate requirements, to the input.
The input device then outputs the optimal video format for the output (such as a display) based on the provided EDID data, ensuring
proper video image quality. This communication takes place over the Display Data Channel (DDC).
• In the commands below, the EDID data can come from either an active output or be set to a specified value.
X$
values:
X$
value for DMS model
Source
X$
value for DMS model
Source
X$
value for DMS model
Resolution
1600 2000 3200 3600 1600 2000 3200 3600 1600 2000 3200 3600
01 01 01 01
Output 1 N/A
19 19 19
Output 19
17 21 33 37
640x480 @ 60 Hz
02 02 02 02
Output 2 N/A
20 20 20
Output 20
18 22 34 38
640x480 @ 75 Hz
03 03 03 03
Output 3 N/A N/A
21 21
Output 21
19 23 35 39
800x600 @ 60 Hz
04 04 04 04
Output 4 N/A N/A
22 22
Output 22
20 24 36 40
800x600 @ 75 Hz
05 05 05 05
Output 5 N/A N/A
23 23
Output 23
21 25 37 41
852x480 @ 60 Hz
06 06 06 06
Output 6 N/A N/A
24 24
Output 24
22 26 38 42
852x480 @ 75 Hz
07 07 07 07
Output 7 N/A N/A
25 25
Output 25
23* 27* 39* 43*
1024x768 @ 60 Hz
08 08 08 08
Output 8 N/A N/A
26 26
Output 26
24 28 40 44
1024x768 @ 75 Hz
09 09 09 09
Output 9 N/A N/A
27 27
Output 27
25 29 41 45
1024x852 @ 60 Hz
10 10 10 10
Output 10 N/A N/A
28 28
Output 28
26 30 42 46
1024x852 @ 75 Hz
11 11 11 11
Output 11 N/A N/A
29 29
Output 29
27 31 43 47
1280x768 @ 60 Hz
12 12 12 12
Output 12 N/A N/A
30 30
Output 30
28 32 44 48
1280x768 @ 75 Hz
13 13 13 13
Output 13 N/A N/A
31 31
Output 31
29 33 45 49
1280x1024 @ 60 Hz
14 14 14 14
Output 14 N/A N/A
32 32
Output 32
30 34 46 50
1280x1024 @ 75 Hz
15 15 15 15
Output 15 N/A N/A N/A
33
Output 33
31 35 47 51
1365x768 @ 60 Hz
16 16 16 16
Output 16 N/A N/A N/A
34
Output 34
32 36 48 52
1365x768 @ 75 Hz
N/A
17 17 17
Output 17 N/A N/A N/A
35
Output 35
33 37 49 53
1366x768 @ 60 Hz
N/A
18 18 18
Output 18 N/A N/A N/A
36
Output 36
34 38 50 54
1366x768 @ 75 Hz
* Default resolution and refresh rate
35 39 51 55
1400x1050 @ 60 Hz
36 40 52 56
1600x1200 @ 60 Hz
37 41 53 57
1920x1200 @ 60 Hz
38 42 54 58
480p @ 60 Hz
39 43 55 59
576p @ 50 Hz
40 44 56 60
720p @ 50 Hz
41 45 57 61
720p @ 60 Hz
42 46 58 62
1080p @ 60 Hz
43 47 59 63
1080i @ 60 Hz
44 48 60 64
1080p @ 50 Hz
45 49 61 65
1080p @ 60 Hz, stereo
46 – 53 50 – 57 62 – 69 66 – 73
User defined
Assign EDID data to an input
E
A
X%
*
X$
EDID
}
EdidA
X%
*
X$]
Assign EDID data to all
inputs
E
A*
X$
*EDID
}
EdidA0*
X$]
Save output #1 EDID data
to a user-defined space
E
S*
X$
EDID
}
EdidS
X$]
View EDID data assignment
E
A*
X%
EDID
} X$]
NOTE: X$ = DDC value (EDID) See the table above. 01 – 16 (20, 32, 36) matches the resolution and rate of the specified output.
X% = Input number 01 – 16 (20, 32, 36)