User Manual

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Operation 18
Control Buttons
Primary functions
Action Save changes. Select Preset
mode.
Select View
mode.
Cancel/escape.
Indication Blink: A save is
needed.
Blink: Save preset.
Lit: Recall preset.
View mode
selected.
Flashes once.
ENTER PRESET
VIEW
ESC
Secondary functions
I/O Grouping Action Select group 1. Select group 2. Select group 3. Select group 4.
Indication Lit: group
selected.
Lit: group
selected.
Lit: group
selected.
Lit: group
selected.
Port
configuration
Action Select 9600
baud.
Select 19200
baud.
Select 38400
baud.
Select 115200
baud.
Indication Blink: selected Blink: selected Blink: selected Blink: selected
Front panel
lock
Action With Esc, toggle
front panel lock
on and off.
With Enter,
toggle front panel
lock
on and off.
Indication Flash twice to indicated the front
panel has been locked or unlocked.
c Enter button — The Enter button has three primary functions (❏) and three secondary
functions (•):
❏ Saves configuration or preset changes that you make on the front panel. To create
a simple configuration:
• Press the desired input button (item
a
on page 17).
• Press the desired output buttons (item
b
on page 17).
• Press the Enter button.
❏ Indicates that a potential tie has been created but not saved.
❏ Indicates that a global preset has been selected to be saved or recalled but that the
preset action has not been accomplished.
• In the I/O Group mode, selects group 1 and indicates its selection.
• Selects 9600 baud for the RS-232/RS-422 port in Serial Port Selection and
Configuration mode and indicate its selection.
• With the Esc button, toggles the front panel lock on and off.
d Preset button — The Preset button has two primary functions (❏) and three secondary
functions (•):
❏ Activates Save Preset mode to save a configuration as a preset and Recall Preset
mode to activate a previously-defined preset.
❏ Blinks when Save Preset mode is active and lights steadily when Recall Preset
mode is active.
• In the I/O Group mode, selects group 2 and indicates its selection.
• Selects 19200 baud for the RS-232/RS-422 port in Serial Port Selection and
Configuration mode and indicates its selection.
• With the View button, indicates that the front panel lock has been toggled on or off.