User Manual

Table Of Contents

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • HTML Operation 98

EDID and Mute Settings Page

The EDID and Mute Settings page provides a way to set the EDID resolution and refresh

rate for each input and to mute and unmute all or individual outputs. Access the EDID and

Mute Settings page (see figure 66) by clicking the EDID and Mute Settings link on the Set

and View Ties page.

Figure 66. EDID and Mute Settings Page

NOTES:

• EDID communicates video display information, including native resolution and

vertical interval refresh rate requirements, to the input. The input device then

outputs the optimal video format for the output (such as a display) based on the

provided EDID data, ensuring proper video image quality. This communication

takes place over the Display Data Channel (DDC).

• On the EDID and Mute Settings page, the EDID data can come from either an

active output or be set to a speciﬁed value.

Select the resolution and refresh rate for an output by using the drop-down box for that

input.

Save the output resolution of the monitor connected to output 1 to one of the User

Assigned locations by clicking the desired User button.

Toggle mute on and off for an output by clicking the Mute button for that output.