User Guide Manual
Presets Drop-down
Displays a list of up to 32 presets. Select a preset from the list to
display it in the window and either activate it (Recall), abort the
selection without either recalling or deleting it (Cancel), or delete it
(Delete).
NOTE: An asterisk in the drop-down list indicates a partial preset exists only in
the DMP64 and has not been uploaded to the DSPConfigurator.
Mode Buttons
Provides selection between Live mode and Emulate mode. See
Emulate Mode and Live Mode on page76 for more information.
Backup
When in Live mode (connected to a DMP64), if presets exist in the DMP64 that are not
present in the DSPConfigurator program (indicated by an asterisk next to the preset
name), the function halts and prompts the user to run a backup.
Backup (File>Backup) transfers all partial presets plus the current configuration from
the DMP64 to a DSP configuration (.edc) file within the DSP Configurator program and
then displays a prompt to save the file to the hard drive. Backup is unavailable when the
DSPConfigurator program is in Emulate mode.
DMP64 • Software Control 26