User`s guide

DVI DA Plus Series • Installation and Operation
2-3
Rack mounting the DVI DA4 Plus
The DVI DA4 Plus can be mounted on the following (optional)
rack shelves:
RSF 123 (3.5" deep, 1U rack shelf kit: part # • 60-190-20)
RSB 123 (3.5" deep, 1U basic rack shelf: part # • 60-604-20)
RSU 126 (6" deep, 1U rack shelf kit: part # • 60-190-10)
RSB 126 (6" deep, 1U basic rack shelf: part # • 60-604-10)
RSU 129 (9.5" deep, 1U rack shelf kit: part # • 60-190-01)
RSB 129 (9.5" deep, 1U basic rack shelf: part # • 60-604-01)
To mount the units, follow these instructions:
1. Remove the rubber feet if these have been installed on the
bottom of the unit.
2. Align the unit on the shelf and secure it to the shelf with
two 4-40 x 3/16" screws in diagonally opposite corners (see
the gure below).
3. Install false faceplate(s) or other unit(s) to the rack shelf.
4. Attach the shelf to the rack with the four provided
10-32 x 3/4" bolts.
Use 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws
1U Universal Rack Shelf
Front false
faceplate
uses 2
screws.
1/2 Rack Width Front False
Faceplate
Rack mounting the DVI DA4 Plus