User`s manual

CVEQ 100 & SVEQ 100 • Quick Start Guide

QS-1

Quick Start Guide — CVEQ 100 & SVEQ 100

Installation and service must be performed by authorized

personnel only.

To install and set up a CVEQ 100 and SVEQ 100, follow these steps:

Step 1

Turn the input and output devices off and unplug their power cords.

Step 2

Mount the CVEQ 100 or SVEQ 100 on a rack shelf, under a desktop,

through a desktop (CVEQ 100 only), or on the back of a rack

(SVEQ 100 only). The example illustration below shows a

VersaTools

rack shelf; you can also use the standard or 6-inch

deep Universal 19-inch rack shelves. See chapter 2, "Installation

and Operation", for detailed descriptions of the different mounting

options.

Step 3

Attach output cables to the rear panel of the line driver and to the

output devices. See "Rear Panel Features and Cabling" in chapter 2.

Step 4

Attach input cables from the input devices and to the line driver’s

rear panel input connectors. See "Rear Panel Features and Cabling"

in chapter 2.

Precautions, continued

QuarterRackVersaToolsShelf

(2) 4-40 x 3/16"

Screws

Use 2 mounting holes on

opposite corners.

VersaTools Rack Shelf

1/4 Rack Width Front

False Faceplate

Rack Shelf Mounting