User`s manual

CVEQ 100 & SVEQ 100 • Specifications, Part #s, Accessories
Specifications, Part Numbers, and Accessories
CVEQ 100 & SVEQ 100 • Specifications, Part #s, Accessories
A-2
A-3
Minimum/maximum levels ........ 0.4 to 2.0 Vp-p (follows input)
Impedance ..................................... 75 ohms
Return loss ..................................... -30 dB @ 5 MHz
DC offset ........................................ ±5 mV with no input signal
Floating: +0.1 to -0.6 V, depending on
input signal content
Sync
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain ................................................ Unbalanced output: 0 dB;
balanced output: +6 dB
Frequency response ..................... 20 Hz to 20 kHz, +0.05 dB, -0.0 dB
THD + Noise ................................. 0.015% @ 1 kHz at nominal level
S/N ................................................. >100 dB at maximum output (unweighted)
Stereo channel separation ........... >80 dB @ 1 kHz
Output cable driving distance ..... Up to 1000’ (300 m) with Extron STP cable
Audio input
Number/signal type .................... 1 stereo unbalanced
Connectors .................................... 2 RCA female
Impedance ..................................... 20k ohms unbalanced, DC coupled
Nominal level ................................ -10 dBV (316 mVrms)
Maximum level ............................. +16 dBu (4.9 V), balanced at
1% THD+N
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type .................... 1 stereo, balanced/unbalanced
Connectors .................................... (1) 3.5 mm captive screw connector, 5 pole
Impedance ..................................... 50 ohms unbalanced, 100 ohms balanced
Nominal level ................................ -10 dBV (316 mVrms), unbalanced;
-2 dBu (632 mV), balanced output
Maximum level .............................. +9 dBV (2.8 V) unbalanced,
+17 dBu (5.6 V) balanced at 1% THD+N
with a 10k ohm load
Specifications
Video
Gain ................................................. Composite video and Y of S-video: -1 dB
to +3 dB (x0.9 to x1.4), adjustable
C of S-video: 0dB to +10 dB (x1 to x3),
adjustable
Equalization ................................... 0 dB to +7 dB (x1 to x2) at 5 MHz,
adjustable
Bandwidth (Y of S-video) ............. 185 MHz (-3 dB)
Output cable driving distance ..... Up to 1000' (300 m) with Extron MHR
cable
Video input
Number/signal type
CVEQ 100 ........................... 1 composite video
SVEQ 100 ............................ 1 S-video
Connectors
CVEQ 100 ........................... 1 female BNC
SVEQ 100 ............................ 2 female BNC
Nominal level ................................ 1 Vp-p for Y of S-video, and for composite
video (including sync)
0.3 Vp-p for C of S-video
Minimum/maximum levels
CVEQ 100 ........................... 0.4 to 2.0 Vp-p with no offset at unity gain
SVEQ 100 ............................ For Y: 0.4 to 2.0 Vp-p with no offset at
unity gain
Impedance ..................................... 75 ohms
Return loss ..................................... <-25 dB @ 0 to 5 MHz
DC offset (max. allowable)........... 4.0 V
Input coupling ............................... AC
Video output
Number/signal type
CVEQ 100 ........................... 1 composite video
SVEQ 100 ............................ 1 S-video
Connectors
CVEQ 100 ........................... 1 female BNC
SVEQ 100 ............................ 2 female BNC
Nominal level ................................ 1 Vp-p for Y of S-video, and for composite
video (including sync)
0.3 Vp-p for C of S-video