User`s manual

CVEQ 100 & SVEQ 100 • Installation and Operation
Installation and Operation, cont’d
2-8
CVEQ 100 & SVEQ 100 • Installation and Operation
2-9
Rear Panel Features and Cabling
The following figures show the back panel configurations of the
CVEQ 100 and SVEQ 100 line drivers.
L R
INPUT
OUTPUT
12V
0.2A MAX
L
VIDEO
R
VIDEO
1
4a 5
2a
3
CVEQ 100 rear panel
12V
0.2A MAX
L
R
L R
Y
C
Y
C
INPUT OUTPUT
1
53 4b
2b
SVEQ 100 rear panel
a
Power connector — Plug the external 12 VDC power supply
into this 2-pin, 3.5 mm captive screw connector. The power
supply is included with the unit. The "Power supply wiring"
section in this chapter explains how to wire the connector.
Ç
Video input connector (CVEQ) — Connect a composite video
input source to this BNC connector.
É
S-video input connectors (SVEQ) — Connect an S-video input
source to these BNC connectors.
c
Audio input connectors — Connect an unbalanced stereo audio
source to these left (L) and right (R) RCA connectors. Wire the
male connector as shown in the following illustration.
Outside
Inside
SVEQ 100 back of the rack installation example