User guide

CSVEQ 100 D • Introduction
Introduction
1-2
About this Manual
The CSVEQ 100 D is a high performance composite video,
S-video, and audio line driver designed to compensate for signal
attenuation and high frequency loss encountered during long
cable runs. It is capable of simultaneously driving composite
video and S-video plus audio signals up to 1000 feet (300 m)
on Extron MHR or RG59 high resolution video cables and STP
series audio cables. The CSVEQ 100 D mounts in a Decora
®
style wallplate and is ideal for use in residential and commercial
environments where video and audio signals need to be
extended over a long distance.
Features
Long distance line driving — Drives composite video or
S-video signals up to 1000 feet (300 meters) using Extron's
MHR cable.
Balanced or unbalanced stereo or dual mono output —
Unbalanced stereo audio input can be output as balanced
or unbalanced stereo audio or as dual mono.
Video gain adjustment — Offers a video gain adjustment for
composite video and Y of S-video with a range of
-1 dB to +3 dB, and C of S-video with a range of 0 dB to
+10 dB.
Equalization adjustment — Features an equalization
adjustment range of 0 dB to +7 dB at 5 MHz that changes
the level and peaking of the output signal to compensate
for use of long cables.
Stereo or dual mono output jumper — A rear panel jumper
selects between stereo and dual mono output formats.
Front panel LED indicator — Indicates when the line driver is
receiving power or a video signal.
Compatibility — Compatible with NTSC, PAL, and SECAM