Setup guide

DTP CrossPoint 84 IPCP • Introduction 1 vi DTP CrossPoint 84 IPCP • Contents
Introduction
This section gives an overview of the Extron DTP CrossPoint 84 IPCP
Series matrix switchers and describes their features. Topics that are
covered include:
• About this Guide
• About the DTP CrossPoint Matrix Switchers
About this Guide
NOTE: For more information on subjects in this guide, see the
DTP CrossPoint 84 IPCP Series User Guide and the IPCP Pro Series
User Guide available at www.extron.com.
This guide provides instructions for an experienced installer to set up and
operate the Extron DTP CrossPoint 84 IPCP Scaling Presentation Matrix
Switchers with DTP Extension. Step by step instructions show you how to:
• Connect the hardware
• Perform basic operations
• Use both the front panel controls and selected
Simple Instruction Set (SIS) commands
• Load and start up the Microsoft
®
Windows
®
-based Product
Configuration Software and DSP Configurator Program.
• Connect to the built-in HTML pages, which you can use to view the
switcher status and make changes to the communications protocol
and set the system clock.
About the DTP CrossPoint Matrix Switchers
The DTP CrossPoint matrix switchers distribute HDCP-compliant HDMI
and Extron proprietary DTP video and audio signal types. A matrix
switcher routes any input signal to any combination of outputs. It can
route multiple input and output congurations simultaneously.
The xed matrix size switchers support a total of eight inputs: six
HDMI and two inputs from Extron DTP transmitting devices. The matrix
switchers provide four outputs: two HDMI and two scaled DTP outputs.
The DTP CrossPoint Matrix Series consists of two 8-input by 4-output
models, differentiated by their audio capabilities:
DTP CrossPoint 84 IPCP SA — Includes a stereo audio amplier
DTP CrossPoint 84 IPCP MA 70 — Includes a 70 V mono audio
amplier