Setup guide

30 DTP CrossPoint 84 IPCP • Remote Control 31DTP CrossPoint 84 IPCP • Remote Control
Accessing the HTML Pages
NOTES:
• If your Ethernet connection to the matrix switcher is unstable,
try turning off the proxy server in your web browser. In Microsoft
Internet Explorer, click Tools > Internet Options >
Connections > LAN Settings, uncheck the Use a proxy
server... box, and then click OK.
• For details on operating the switcher via HTML pages, see the
"HTML Operation" section in the DTP CrossPoint 84 IPCP User
Guide.
1. Start the web browser program.
NOTE: For best results, Extron recommends the following
browsers and compatibility mode:
• Microsoft
®
Internet Explorer
®
, version 8.0 or newer, with
compatibility mode off
• Mozilla
®
Firefox
®
, version 6 or newer
• Google
®
Chrome
®
, version 9 or newer
• Apple
®
Safari
®
, version 4 or newer
2. Click in the Address eld and enter the IP address.
NOTE: 192.168.254.254 is the factory-specified default value for
this field.
3. Press the keyboard <Enter> key. The switcher checks whether it is
password-protected.
If the switcher is not password-protected, it checks and
downloads the HTML start-up page. The switcher is ready for
operation via HTML remote control.
If the switcher is password-protected, it downloads the Enter
Network Password dialog box (see gure 17).
Figure 17. Network Password Dialog Box
NOTE: A User name entry is not required.
4. Enter the appropriate administrator or user password in the
Password eld and click OK.
The switcher downloads the HTML start-up page (see gure 18). The
switcher is ready for operation via HTML remote control.
Figure 18. HTML Startup Page