Setup guide

25DTP CrossPoint 84 IPCP • Remote Control
Installing and Starting the Control Programs
Several useful Windows-based programs are available on the Extron
website, including the Digital Signal Processor (DSP) Congurator
program, the Product Conguration Software (PCS), and the Firmware
Loader program.
The Product Conguration Software congures the video functions of the
switcher.
The DSP Congurator program is required for full operation of the
DSP functions of the switchers and to save presets. It also provides
some limited control of the non-DSP functions of the switcher. See
the DTP Crosspoint 84 User Guide and the program Help le for more
information.
Run either program from a PC connected to an Ethernet port on the
IPCP control processor (item
Q on page 8), serial port (item R on
page 8), or USB port (item A on page 14) on the switcher.
NOTES:
• For details on operating the program, see the DTP CrossPoint 84
Switcher User Guide.
• The DSP Congurator program has a software switch that allows
you to lock out audio adjustments in the Product Congurator
Software, making them unavailable for selection.
Installing the programs
The DSP Congurator, version 2.6 or newer; PCS, version 2.0 or newer;
and Firmware Loader are available on the Extron website. Download and
install all programs as follows:
1. Visit www.extron.com and click the Download tab.
1111111111
22
22222222
2. Click the Software link.
3. Select the desired software to download and click Download.
TIP: Jump to the nearest page of downloads by clicking the
desired filtering letter.
3333333333
The Download Center dialog box appears (see figure 12, on the next
page).