Setup guide

21DTP CrossPoint 84 IPCP • Remote Control
SIS Command and Response Table for Matrix Switcher Commands
Command SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Create ties
NOTES: • Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02$03*03%4*4$.
• The matrix switchers support 1- and 2-digit numeric entries (1*1! or 02*02%).
• Audio breakaway command functions are dependent on the audio routing selections of the inputs and outputs.
Tie input
X! video and audio to
output
X@
X!
*X@! OutX@•InX!•All]
Tie the video and audio from input
X!
to output
X@
.
Example:
1*3!
Out03•In01•All
]
Tie input 1 to output 3.
Tie input
X!
to output
X@
, video
X!*X@%
Out
X@•InX!•Vid]
Tie input
X!
video to output
X@
. Audio is broken away.
Example:
7*5%
Out05•In07•Vid
]
Tie input 7 video to output 5.
Tie input
X!
to output
X@
, audio
X!*X@$
Out
X@•InX!•Aud]
Tie input
X!
audio to output
X@
. Audio is broken away.
Example:
2*04$
Out04•In2•Aud
]
Tie input 2 audio to output 4.
Tie input
X!
to all outputs
X!*! InX!•All] X!*%
and
X!*$
are also valid.
Quick multiple tie
E+QX!*X@!...X!*X@$}
Enter multiple tie commands (
!
,
%
, and
$)
before the
}
.
Qik
]
Read video output tie
X@% X!]
Video input
X!
is tied to output
X@
.
X@$
is also valid for audio.
Video mutes
Video only mute
X@
*1B Vmt
X@
*1
]
Mute output
X@
video (sync remains active).
Video and sync mute
X@
*2B Vmt
X@
*2
]
Mute output
X@
video and sync.
Video unmute
X@
*0B Vmt
X@
*0
]
Unmute output
X@
(video and sync on).
Read video mute
X@
B
X#]
Global video mute
1*B
Vmt1
]
Mute all video outputs.
Global video unmute
0*B
Vmt0
]
Unmute all video outputs.
NOTE:
X!
= Input number 00 – 08 (00 = untied)
X@
= Output number 01 – 04
X#
= Mute 0 = off (unmuted) 1 = video muted 2 = video and sync muted