Owner manual

Operation, cont’d
CrossPoint 300 Matrix Switchers • Operation3-10
1 2 3 4 5
OUTPUTS
6
7 8
ENTER PRESET
Press and release the Output 3, Output 4,
and Output 8 buttons.
The LEDs blink to indicate that the selected
RGBHV and audio input will be tied to
these outputs.
The Enter LED blinks to indicat
e
the need to confirm the change
.
Figure 3-7 — Select the outputs
5. Press and release the Enter button (figure 3-8).
E
NTER
The Enter LED and all input LEDs an
d
output LEDs return to the unlit state.
Press the Enter button to confirm
the configuration change.
Figure 3-8 — Press the Enter button
The current configuration (figure 3-9) is now:
• Input 5 video and audio tied to output 3, output 4, and output 8
Input 5 (video/audio) tied
to outputs 3, 4, and 8.
Input
Output
3
4
8
5
Vide
o
Aud
io
Figure 3-9 — Example 1, final configuration
Example 2: Adding a tie to a set of video and audio ties
The following steps show an example in which a new video tie is added to the
current configuration. The steps show the front panel indications that result from
your actions.