User Manual

Lancia
xixi xixi
xi • Installation
Installation, cont’d Installation
Installation Overview
To install and set up the Lanciaxi line doubler for operation, follow these steps:
1
Turn off all of the equipment. Ensure that the video sources (DVD players, laserdisc players, VCRs, satellite receivers, or other devices), the Lanciaxi, and the output
display device are all turned off and disconnected from the power source.
2
Mount the Lanciaxi . See “Mounting the Lanciaxi Line
Doubler” in this chapter.
3
Attach the cables. See “Rear Panel Cabling” in this chapter.
4
Connect power cords and turn on the display device and the input devices, in that order.
5
Set the rear panel DIP and sync switches. See “Rear Panel Controls” in chapter three.
6
Select an input and adjust the picture controls on the front panel. See “Front Panel Controls and Indicators” in chapter three.
Mounting the Lancia
xixi xixi
xi
1. For optional rack mounting, mount the Lanciaxi on the left
or right side of a 19" 1U Universal Rack Shelf (Extron part #60-190-01) (figure 2).
4-40 X 1/8 Screws
Use 2 Mounting Holes
on Opposite Corners
False Front Panel
Uses 2 Front Holes Only
Figure 2 — Rack mounting the Lancia
xixi xixi
xi
a. If feet were previously installed on the bottom of the
case, remove them.
2-2 Lancia
xixi xixi
xi • RS-232/Remote Control
COMMAND/RESPONSE TABLE
Description Command Response Notes
ASCII HEX to host
Input selection
Select input
X1
2! 32•21 C2 Select input 2
Picture controls
Freeze on F 7C Frz1
Freeze (frame) video
Freeze off f 7E Frz0
Release freeze mode
Set color value to
X2 X2
C
X2
43 Col
X2
Set color value to
X2
Increment color value {C 7B 43 Col
X2
Previous color value +1
Decrement color value }C 7D 43 Col
X2
Previous color value -1
Set tint value to
X2 X2
T
X2
54 Tin
X2
Set tint value to
X2
Increment tint value {T 7B 54 Tin
X2
Previous tint value +1
Decrement tint value }T 7D 54 Tin
X2
Previous tint value -1
Set contrast value to
X2 X2
^
X2
5E Con
X2
Set contrast value to
X2
Increment contrast value {^ 7B 5E Con
X2
Previous contrast value +1
Decrement contrast value }^ 7D 5E Con
X2
Previous contrast value -1
Horizontal shift
Set H shift value to
X6 X6
H
X6
48 Hph
X6
Set horizontal shift value to
X6
Increment H shift value {H 7B 48 Hph
X6
Previous horizontal shift value +1
Decrement H shift value }H 7D 48 Hph
X6
Previous horizontal shift value -1
Information, part number, and firmware requests
Information request I/i 49/69 C
X1
•T
X4
•Col
X2
•Tin
X2
•Con
X2
•Hph
X6
•Frz
X3
Input 2; NTSC 3.58; color — 165;
C2•T1•Col65•Tin70•Con100•Hph39•Frz0
tint —70; contrast — 100;
H shift — 39;freeze off
Request for part number N/n 4E/6E N60-213-01
60-213-01 = Lanciaxi
Query software version Q/q 51/71 QVER•
X5
Software version
X5
4-5