User Manual

CD 900 Decoder • Specifications
CD 900 Decoder • Specifications
Specifications, cont’d
A-3
Serial control pin configurations 2 = TX, 3 = RX, 5 = GND
Contact closure ............................ 9-pin female D connector
Program control .......................... Extron’s control program for Windows®
Extron’s Simple Instruction Set™ – SIS™
General
Power ............................................ 100VAC to 240VAC, 50/60 Hz, 7.5 watts,
internal, auto-switchable
Temperature/humidity ............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount .................................. Yes, with optional rack shelf, part #60-
190-01
Enclosure type ............................. Metal
Enclosure dimensions ................ 1.75" H x 8.75" W x 9.5" D
4.45 cm H x 2.22 cm W x 24.13 cm D
Shipping weight .......................... 5 lbs (2.3 kg)
Vibration....................................... NSTA 1A in carton (National Safe Transit
Association)
Approvals ..................................... UL, CUL, CE
MTBF ............................................. 30,000 hours
Warranty....................................... 2 years parts and labor
Specifications are subject to change without notice.
Included Parts
Included parts Part number
CD 900 Quad-Standard Decoder 60-213-01
CD 900 Quad-Standard Decoder label 33-244-01
CD 900 Quad-Standard Decoder User’s Manual 68-529-01
Accessories
Accessories Part number
Extron 19" 1U Universal Rack Shelf 60-190-01
S-video male to 2 BNC adapter, female, 8” 26-353-02
S-video female to 2 BNC, male (various lengths) 26-353-xx
BNC male to RCA female adapter 10-264-01
Specifications
Video
Gain ............................................... Variable by adjusting contrast
Bandwidth .................................... 6 MHz (-3dB) (luminance)
Differential phase error.............. 1.5º, 0 to 10 MHz
Differential gain error ................ 1.5%, 0 to 10 MHz
Video input
Number/signal type................... 1 S-video (Y/C), 1 composite video
(switch-selectable)
Connectors.................................... 1 4-pin mini-DIN female S-video
1 BNC female composite video
Nominal level(s) .......................... Analog 1V p-p
Minimum/maximum levels...... Analog 0.4V to 2.0V p-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency ................. 15.6 kHz to 17.75 kHz
Vertical frequency ....................... 50 Hz to 60 Hz
Video output
Number/signal type................... 1 RGBHV, RGBS, RGsB (toggle switch-
selectable), or component (Y, P
B, PR)
Connectors.................................... 5 BNC female
Nominal level .............................. RGB Analog 0.7V p-p, DC coupled
Y, P
B, PR Analog 1.0V p-p, DC coupled
Impedance .................................... 75 ohms
DC offset ....................................... ±0.1V maximum
Sync
Output type.................................. RGBHV, RGBS, RGsB (toggle switch or
Windows program control selectable)
Standards...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level .................................... 0.3V p-p
Output level ................................. TTL 5V p-p
Input impedance ......................... 75 ohms
Output impedance ...................... 75 ohms
Polarity.......................................... RGBHV.....................positive or negative
(switch-selectable)
S-video .....................negative
Composite video .... negative
Control/remote — decoder
Serial control port ....................... RS-232, 9-pin female D connector
Baud rate and protocol............... 9600, 8-bit, 1 stop bit, no parity
A-2