User`s manual

Cable Cubby
®
Products • Reference Information
Reference Information, cont’d
Cable Cubby
®
Products • Reference Information
A-10
A-11
AAP shelf brackets (CC 300, 600, 800) Part number
Four-space AAP Cable Cubby bracket (set of 2) (gure A-2) 70-273-01
Three-space AAP Cable Cubby bracket (set of 2) (gure A-2) 70-272-01
Two-space AAP Cable Cubby bracket (set of 2) (gure A-2) 70-271-01
Single-space AAP Cable Cubby bracket (set of 2) (gure A-2) 70-392-01
Four-Space Shelf Bracket
and Split AAPs
Three-Space Shelf Bracket
and Split AAPs
Two-Space Shelf Bracket
and Split AAPs
Figure A-2 — Shelf brackets
Grommet and plug kit Part number
N
The kit listed below includes three grommets; one large, one medium,
and one small.
Grommet and hole plug kit 70-387-01
Routing Template Part Numbers
The following reuseable sheet metal routing templates are
recommended for installation.
Template Part number
Cable Cubby 200 routing template 70-384-01
Cable Cubby 300S/300C routing template 70-237-01
Cable Cubby 600 routing template 70-239-01
Cable Cubby 800 routing template 70-240-01
Top Plate Dimensions
There are two preferred and recommended methods for cutting
the table: either use the appropriate metal routing template (see
"Routing Template Part Numbers", above, for part numbers)
(gure A-3 and chapter 2, "Installation") and a router or use a
hole saw (Cable Cubby 300C only).
HSA 200
USER ACCESS
HSA 200
CABLE CUBBY 300
CABLE CUBBY 300
USER ACCESS
Figure A-3 — CC 300S/300C metal routing template
If you choose not to use the metal routing templates available
from Extron, the cut-out templates (gure A-4, gure A-5, gure
A-6, gure A-7, and gure A-8) will help you properly prepare
the mounting surface. The cutout templates are not to scale and
are for reference only. The surface cut-out area dimensions for
the template are marked in bold type.
For full size paper templates, visit the Extron Web site
(www.extron.com) or call the Extron S
3
Sales & Technical
Support Hotline.