User Guide Owner's manual

4. Glue or tape the carpet to the floor and side
ramps.
NOTE: Do not use the supplied tape to
attach the carpet to the ramp. The
tape is intended only for attaching
the rubber inlay strip to the cover
track.
5. Using the provided template, trim the wall
baseboard to fit snugly around the track.
6. Attach the baseboard to the wall.
7. For model part number 42-156-24A, attach
the provided rubber strip to the cover track
raceway using double-sided adhesive tape
(provided).
For model part number 42-155-24A, cut a
strip of the finished carpeting and glue it to
the cover track raceway.
AVTrac • Installation 16