User Manual

AVT 100 • Operation
Operation, cont’d
AVT 100
4
Chapter Four
Software Configuration and
Control
Using Simple Instruction Set (SIS
™
) Commands
Windows
®
-Based Control Software
3-10
Saving a preset using the IR remote
To assign a channel number to one of the 198 available presets,
1. Switch to the channel that you want to assign. (See
“Selecting a channel (tuning) using the IR remote,” on the
previous page.)
2. Enter the preset number to which you want to assign the
current channel.
3. Press Save. The AVT 100 saves the preset, and displays
“P” and the preset number as confirmation. After
3 seconds, the display returns to the channel number that
you just saved.
N If an invalid preset number is entered, no preset is saved.