User Guide User guide

Figure 52. Choose File to Upload Widow with a Firmware File Selected
NOTES: • Valid rmware les must have the le extension “.S19”. Any other le
extension is not a firmware upgrade.
• The original factory-installed firmware is permanently available on the
scaler. If the attempted firmware upload fails for any reason, the scaler
automatically reverts to the factory-installed firmware.
7. Click Open.
8. Click Upload. While the rmware is uploading, the Upload button changes to
“Uploading...” . When the uploading process is complete, the button changes back to
Upload. The uploading may take a few minutes.
Annotator • HTML Operation 88