User Guide User guide

Scan Converter Tab

NOTE: The Scan Converter tab appears only if the optional scan converter

output board is installed in the Annotator.

The Scan Converter tab allows viewing and changing of the conﬁguration settings of

the optional scan converter output board.

Figure 40. The Scan Converter Tab Screen

• Picture Adjustments — The Picture Adjustments and Image Filter sections of the

Scan Converter tab allows adjustments to be made to the image settings of the

scan converted output. Adjustable image settings are: Horizontal Center,

Vertical Center, Horizontal Size, and Vertical Size. Change the

value ﬁeld (from 0 to 4095) as required. In addition the Image Filter settings (ﬂicker,

horizontal detail, and encoder sharpness) can be set as desired from each drop-down

list.

• Output Conﬁg — In this section the output standard (PAL or NTSC) and the format

of the scan converted output (S-video/composite, YUVi, or RGsB) can be set. Select

the applicable standard and format as desired.

Annotator • SPPCP 74