User Guide User guide

I/O Conguration Tab

The I/O Configuration tab allows input and output conguration, as well as EDID

emulation settings to be adjusted.

Figure 38. The I/O Conﬁguration Tab Screen

• Input Conﬁg — Set a suitable video type for an input by clicking on the drop-down

box (see input 7 above) and selecting a listed video type.

If Auto Image on an input is desired mark the check box.

Check Film Mode if 3:2 pull down detection for NTSC and 2:2 ﬁlm detection for PAL

video sources is relevant.

• Output Conﬁg — To conﬁgure an output resolution, refresh rate, output type, or

sync polarity, select the desired values from the respective drop-down list.

• EDID Emulation — To set resolution and refresh rates for EDID emulation on the

VGA/DVI inputs, select the values from the drop-down list. Alternatively select Match

Output to automatically set the EDID to match the output resolution and refresh

rate.

Annotator • SPPCP 72