User Guide User guide

Command ASCII command
(host to processor)
Response
(processor to host)
Additional description
Drop shadow
Enable drop shadow
E1SHDW} Shdw1]
Enable a drop shadow.
Disable drop shadow
E0SHDW} Shdw0]
Disable drop shadow.
View setting
ESHDW} X1)]
View current fill setting.
Eraser/highlighter size
Set eraser/highlighter size
EX5$ERSR} ErsrX5$]
Set the eraser/highlighter size to
X5$
.
View size
EERSR} X5$]
View current eraser/highlighter size.
Annotation edit functions
Clear all annotations
E0EDIT} Edit0]
Clears all annotations on the output.
Cannot be undone.
Undo last annotation
E1EDIT} Edit1]
Undoes the last annotation. Seven
states are held in memory.
Redo annotation
E2EDIT} Edit2]
Previously removed annotation is
placed on the output.
Annotation display
Set output to show
annotation
EX@ASHW} AshwX@]
Set which video outputs display
annotations.
View font
EASHW} X@]
View setting.
Cursor display
Set output to show cursor
EX@CSHW} CshwX@]
Set which video outputs display the
cursor.
View font
ECSHW} X@]
View setting.
On-screen clock
Enable on-screen clock
EX5^TIME} TimeX5^]
Display the time on the video output.
View settings
ETIME} X5^]
View setting.
On-screen clock horizontal position
Specific value
EKX1^HCTR} HctrKX1^]
Set horizontal position to
X1^
.
Increment to right
EK+HCTR} HctrKX1^]
Shift clock right.
Increment to left
EK-HCTR} HctrKX1^]
Shift clock left.
View settings
EKHCTR} X1^]
Horizontal position value is
X1^
.
On-screen clock vertical position
Specific value
EKX1^VCTR} VctrKX1^]
Set vertical centering to
X1^
.
Increment up
EK+VCTR} VctrKX1^]
Shift clock down.
Increment down
EK-VCTR} VctrKX1^]
Shift clock up.
View settings
EKVCTR} X1^]
Vertical position value is
X1^
.
NOTE:
X@
= Output selection: 0 = all outputs (default), 1 = program only (BNC, MTP, optional output card),
2 = preview only (VGA), 3 = none
X1)
= off/disable (0), on/enable (1)
X1^
= H or V position: (zero location is 2048, and limits are ± the output resolution)
X5$ = Line weight/eraser/highlighter width: 1 to 63 pixels wide (default = 8)
X5^
=
On-screen clock:
0 = disabled (default), 1 = date and time, 2 = time only, 3 = date only
.
Annotator • SIS Communication and Control 52