User Guide User guide

Command ASCII command
(host to processor)
Response
(processor to host)
Additional description
Horizontal shift
Specify a value
EX1^HCTR} HctrX!*X1^]
Set horizontal position to
X1^
.
Increment value
E+HCTR} HctrX!*X1^]
Shift position right.
Decrement value
E-HCTR} HctrX!*X1^]
Shift image left.
View value
EHCTR} X1^]
Show horizontal position value.
Vertical shift
Specify a value
EX1^VCTR} VctrX!*X1^]
Set vertical position to
X1^
.
Increment value
E+VCTR} VctrX!*X1^]
Shift image down.
Decrement value
E-VCTR} VctrX!*X1^]
Shift image up.
View value
EVCTR} X1^]
Show vertical position value.
Horizontal size
Specify a value
EX1&HSIZ} HsizX!*X1&]
Set horizontal size to
X1&
.
Increment value
E+HSIZ} HsizX!*X1&]
Widen the image.
Decrement value
E-HSIZ} Hsiz
X!
*X1&]
Make image narrower.
View value
EHSIZ} X1&]
Show horizontal size value.
Vertical size
Specify a value
EX1&VSIZ} Vsiz
X!
*X1&]
Set vertical size to
X1&
.
Increment value
E+VSIZ}
Vsiz
X!
*
X1&]
Make the image taller.
Decrement value
E-VSIZ}
Vsiz
X!
*
X1&]
Make image shorter.
View value
EVSIZ}
X1&]
Show vertical size value.
Zoom
Specify a value
EX1*ZOOM} ZoomX!*X1*]
Set zoom percentage to
X1*
.
Increment value
E+ZOOM} ZoomX!*X1*]
Zoom in.
Decrement value
E-ZOOM} ZoomX!*X1*]
Zoom out.
View value
EZOOM} X1*]
Show zoom percentage.
Pan
Specify a horizontal value
EX1(HPAN} HpanX!*X1(]
Set horizontal pan value to
X1(
.
Pan left
E+HPAN} HpanX!*X1(]
Pan left.
Pan right
E-HPAN} HpanX!*X1(]
Pan right.
Specify a vertical value
EX1(VPAN} VpanX!*X1(]
Set vertical pan value to
X1(
.
Pan down
E+VPAN} VpanX!*X1(]
Pan down.
Pan up
E-VPAN} VpanX!*X1(]
Pan up.
NOTE: X! = Input selection; 1 – 7
X1^ = H and V position; zero location is 2048, and limits are ± the output resolution
X1& = H and V size (0 to 200% of the output area in single pixel increments)
X1* = Zoom, 100 to 500%; default for low resolution video = 111%, default for high resolution video = 100%)
X1( = Pan, 0 to 200 (default = 100, center point)
Annotator • SIS Communication and Control 46