User`s manual

3#0s)NSTALLATIONAND/PERATION
Installation and Operation, cont’d
2-10
IDENTICALLYATBOTHENDSOFTHECABLEANDTHATTHE
FACEPLATEISCONNECTEDTOANEARTHGROUNDVIATHEWALL
BOXORDIRECTLY
s )FPOWERISPRESENTATTHE3#0BUTTHESWITCHERDOESNOT
RESPONDTOTHE3#0SCONTROLSMAKESURETHE3#0S$)0
SWITCHSETTINGSARECORRECT
4 #ALLTHE%XTRON33ALESAND4ECHNICAL3UPPORT(OTLINEIF
THEREISSTILLNOSWITCHERRESPONSETOCHANGESMADEATTHE3#0
Mounting the SCP to the Electrical Box
/NCETHESYSTEMHASBEENCABLEDANDTESTEDTHECONTROLPANEL
CANBEINSTALLEDINTHEWALLORFURNITURE
1 7ITHPOWERREMOVEDINSERTTHE3#0INTOTHEWALLOR
FURNITURE
2 -OUNTITTOTHEWALLBOXORMOUNTINGBRACKETSWITHTHE
PROVIDEDMACHINESCREWSASSHOWNINTHE
ILLUSTRATIONBELOWORATTACHITDIRECTLY
TOTHEFURNITUREWITHWOODOR
METALSCREWS
Installation
Cable
Cable
Clamp
SCP 250
SCP 250
IR
DISPL
AY
AU
DIO
VO
LUME
POWER MUTE
MODE
MAX/
MIN
N
If you are not
installing the SCP
into a grounded
metal wall box,
make sure that
the faceplate is
grounded to an earth
ground.
N
The SCP is shipped with a mounting bracket (mudring).
However, for an installation that meets UL standards for
safety, the SCP should be installed in a UL Listed electrical
junction box, which must be purchased separately.
3 2ESTOREPOWERTOTHEDEVICES
9OUHAVECOMPLETEDTHEINSTALLATION