User guide

Operation
Transmitter Front Panel Indicators
The transmitters have three LED indicators on the front panel. The AAP and Decora
transmitters also include a female USB mini-type B port.
LINK
HOST
ACTIVITY
USB EXTENDER Tx
HOST
USB EXTENDER AAP Tx
ACTIVITY
LINK HOST
bghi
HOST
ACTIVITY
LINK
HOST
b
g
h
i
ghi
Figure 5. Front Panel Indicators, USB Extender Transmitters
b
USB Host connector (AAP and Decora Tx only) — Connect a Type A male to
mini Type B male USB cable between this port and the USB output port of a PC or
laptop. The USB Extender is USB 2.0 compliant and able to support data transfers of
480 Mbps (high speed), 12 Mbps (full speed), and 1.5 Mbps (low speed).
g
Power LED — This front panel LED lights to indicate the unit is receiving power.
h
Link LED — Lights when the transmitter and receiver are successfully connected
together by the twisted pair cabling and both transmitter and receiver are powered.
i
Host Activity LED — Blinks when the transmitter is powered and begins
communicating with the host PC.
USB Extenders • Installation and Operation 8