User guide
Table Of Contents
- FOX Matrix 320x, FOX Matrix 14400
- Safety Instructions
- FCC Class A Notice
- Contents
- Introduction
- Installation
- Programming Guide
- Matrix Software
- HTML Operation
- Maintenance and Modifications
- Ethernet Connection
- Warranty & Contact Info
Firmware Upgrade Page
The Firmware Upgrade (see figure 43) page provides another way to replace the firmware
that is coded on the control board of the switcher without taking the switcher out of service.
Access the page by clicking the Firmware Upgrade link on the System Settings page.
Figure 43. Firmware Upgrade Page
Update the switcher firmware as follows:
NOTE: The Firmware Upgrade page is only for replacing the firmware that controls all
switcher operation. To insert your own custom HTML pages, see File Management
Page, on page 71.
1. Perform steps 1 through 5 of Installing the Software, on page 38, to download the
firmware upgrade from the Extron website.
2. Connect the PC to the FOX matrix switcher via the LAN port of the switcher.
3. Access the FOX matrix switcher using HTML pages.
4. Click the Configuration tab (see figure 44).
7
9
6
8
4
5
Figure 44. Firmware Upgrade
FOX Matrix 320x and FOX Matrix 14400 • HTML Operation
70