User guide
Table Of Contents
- FOX Matrix 320x, FOX Matrix 14400
- Safety Instructions
- FCC Class A Notice
- Contents
- Introduction
- Installation
- Programming Guide
- Matrix Software
- HTML Operation
- Maintenance and Modifications
- Ethernet Connection
- Warranty & Contact Info
HTML Operation
This section introduces using the built-in HTML pages to operate the FOX Matrix Switchers,
including:
• Opening the Embedded Web Pages
• Status Tab
• Configuration Tab
• File Management Tab
• Control Tab
The switcher can be controlled and operated through its LAN port, connected via a LAN or WAN,
using a web browser such as Microsoft® Internet Explorer®. The browser display of the
status or operation of the switcher has the appearance of web pages. This section describes the
factory-installed HTML pages, which are always available and cannot be erased or overwritten.
NOTE: If your Ethernet connection to the matrix switcher is unstable, try turning off the
proxy server in your web browser. In Internet Explorer, click Tools > Internet Options >
Connections > LAN Settings, uncheck the Use a proxy server... box, and then
click OK.
FOX Matrix 320x and FOX Matrix 14400 • HTML Operation
5858