User guide
Table Of Contents
- FOX Matrix 320x, FOX Matrix 14400
- Safety Instructions
- FCC Class A Notice
- Contents
- Introduction
- Installation
- Programming Guide
- Matrix Software
- HTML Operation
- Maintenance and Modifications
- Ethernet Connection
- Warranty & Contact Info
4. Enter the file name under which you want to save any changes to the file, and click OK.
5. Select Fiber Matrix as the Matrix Model, 320x or 14400 as the Default Size, and
either singlemode or multimode for each board installed (see figure 34). Click OK.
Figure 34. Emulate Configuration Dialog Box
6. Continue using the program as described on page 41.
Using the Help System
For information about program features, you can access the help program in any of the
following ways:
• From the Extron Electronics program folder or group, double-click the
MATRIX Switcher Help icon (shown at right).
• From within the Matrix Switchers Control Program, click Help > Contents
on the menu bar.
• From within the Matrix Switchers Control Program, press the keyboard <F1> key.
FOX Matrix 320x and FOX Matrix 14400 • Matrix Software
57