User guide

• Physical Switcher Layout — Calls the FOX matrix switcher Physical Configuration
window (see figure 29), which displays the I/O board type installed in each slot. The
Channels field can be helpful in identifying a specific input or output. In figure 29, for
example, input 49 is identified as slot 4, input transceiver 1 (4i01).
Figure 29. Physical Configuration Window
• Name Presets — Allows you to assign a name to each of the 64 global presets and
100 room presets.
NOTE: Preset names are limited to 12 upper- and lower-case alphanumeric
characters, <space>, _, and / characters. The HTML language reserves certain
characters for specific functions (see Special Characters on page 35).
• Show RS-232 Strings — Displays the ASCII commands that are used by the current
configuration. You can refer to these for SIS programming.
• Room configuration — Allows you to assign outputs to or delete outputs from
rooms.
NOTE: A room is a subset of outputs that are logically related to each other, as
determined by the operator. The FOX matrix switcher supports up to 10 rooms,
each of which can consist of from 1 to 16 outputs.
• Initialize ... — Initializes and clears any or all of the following: ties, presets, preset
names, icon names, and icons.
FOX Matrix 320x and FOX Matrix 14400 • Matrix Software
54