User guide

Tools menu
• Assign Device Icons — Displays the complete set of
input and output device icons. You can drag any of these
icons to the input and output boxes.
• Edit Device Palette — Allows you to add your own
device icon graphics.
• Mute-Outputs settings — Displays the Mute Adjust
window, from which you can mute each output.
• FOX Re-clocker settings — Displays the FOX
Reclocking Rate Settings window, from which you can
select the reclocking rate for one or all outputs and mute
and unmute the output.
• View Input Frequencies — Displays the Input
Detection window, which shows the data rates for SDI
and HD-SDI inputs only. This selection is not available if
no BNC 3G/HD/SD-SDI I/O boards are installed.
• Update Firmware ... — Allows you to replace the
firmware that is coded on the control board of the switcher without taking the switcher
out of service (see Updating Firmware on page 47).
• IP Options — Allows you to set IP options (see IP Settings/Options Window on
page 43).
• HTML file manager — Displays a list of HTML files installed on the switcher and
allows you to upload custom files from a PC connected to the switcher (see Uploading
HTML files on page 51).
• Hardware status — Provides an overall view of the status of the matrix
switcher, including the power supply voltages, the internal temperature, the
Remote RS-232/RS-422 port configuration, and the installed and updated firmware
status (see figure 28).
Proper operation.
Component has failed.
Figure 28. Status Window
FOX Matrix 320x and FOX Matrix 14400 • Matrix Software
53