User guide

Command and Response Table for SIS Commands (continued)
Command SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Information requests (continued)
NOTE: There are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the
overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest optional Extron firmware
update, which is available at www.extron.com.
Query firmware version
Q
X2$]
Example:
Q
1.23
]
The factory-installed controller firmware version
is 1.23 (sample value only).
Query controller firmware
version (verbose)
0Q
X2$
-
X2%
-
X2%]
Provide a detailed status of the Ethernet protocol
firmware, the controller firmware, and any
firmware upgrade. An asterisk (*) marks the
firmware that is running. A caret (^) marks that
the firmware has a bad checksum or an invalid
load. ?.?? marks that firmware is not loaded.
Response description:
Ethernet protocol firmware version-controller firmware version-updated firmware version
]
Example:
0q
Ether
net protocol
firmware
Description
FOX Matrix firmware version Updated firmware version
* indicates the version running Upload date and time
1.23-1.00(1.68-FOMX Series -Wed, 20 Feb 2008 00:00:00 GMT)-1.00*(1.06-FOMX Series -Mon, 17 Mar 2007 16:39:21 GMT)
Request system status
S
FOX Matrix 320x
X2^
•
X2^
•
X2^
•
X2^
•
X2^
•
X2^
•
X2^
•
X2^
•
X2^
•
X2&
•
X2*
•
X2*
•
X2*
•
X2*
•
X2*
•
X2*
•
X2*
•
X2*
•
X2(
•
X2(
•
X2(
•
X2(]
FOX Matrix 14400
X2^
•
X2^
•
X2^
•
X2^
•
X2^
•
X2^
•
X2^
•
X2&
•
X2*
•
X2*
•
X2*
•
X2*]
Response description (FOX Matrix 320x):
+3.3V•+5V•+2.5V•+1.8V•+12V (backplane) •+12V (primary PS1)•+12V (redundant PS1)•+12V (Primary PS2)•+12V (redundant PS2)•Temp•
Fan1 RPM•Fan2•Fan3•Fan4•Fan5•Fan6•Fan7•Fan8•Pri1 PS status•Red1 PS status•Pri2 PS status•Red2 PS status
]
Response description (FOX Matrix 14400):
+3.3V•+5V•+1.3V•+1.2V•+12V (backplane)•+12V (redundant PS)•+12V (primary PS)•Temp•Fan1 RPM•Fan2•Fan3•Fan4
]
Example
(FOX Matrix 14400):
S
Backplane receiving 12.00 V Internal temperature 78.8° F
Fan 1 rotating at 2,909 RPM3.3 V power system at 3.27 V
3.27
•4.95•1.31•1.22•12.00•12.06•12.12•+078.80•02909•02909•02909•02860
NOTE: X2$ = Firmware version number to second decimal place (x.xx)
X2% = Verbose firmware version-description-upload date/time. See above
X2^ = Voltage Positive or negative voltage and magnitude
X2& = Temperature Degrees Fahrenheit
X2* = Fan speed (in RPM)
X2( = Power supply status 1 = Ok 0 = Out of tolerance or failed
FOX Matrix 320x and FOX Matrix 14400 • Programming Guide
31