User guide
Table Of Contents
- FOX Matrix 320x, FOX Matrix 14400
- Safety Instructions
- FCC Class A Notice
- Contents
- Introduction
- Installation
- Programming Guide
- Matrix Software
- HTML Operation
- Maintenance and Modifications
- Ethernet Connection
- Warranty & Contact Info
Installation
This section details the installation and configuration of the FOX Matrix Switchers, including:
• Setup and Installation Checklist
• Rear Panel Boards, Cabling, and Features
• Front Panel Features
• Reset Operations
Setup and Installation Checklist
Get Ready
c Familiarize yourself with the matrix switcher.
c Obtain IP setting information for the matrix switcher from the local network
administrator. Read Ethernet Connection, beginning on page 82.
Configure the Matrix Switcher
c Install the desired I/O boards (page 75).
Perform Physical Installation
c If desired, install the switcher in a rack (page 74).
c Cable input and output devices to the I/O ports (page 11).
c As desired, connect computers, control systems, or both to the rear panel Remote port
(page 13), LAN port (page 14), and front panel Configuration port (page 16).
c Connect power (page 15).
c Test the switcher by creating a tie (page 25).
Install Software
c Install the Matrix Switchers Control Program (page 38).
FOX Matrix 320x and FOX Matrix 14400 • Installation
7