Setup guide

Refer also to the FOX 4G Matrix 14400 User’s Manual at www.extron.com.
Front Panel
FOX 4G MATRIX 14400
CONFIG
FIBER OPTIC DIGITAL MATRIX SWITCHER
POWER SUPPLY
PRIMARY
REDUNDANT
7 8
Figure 2-7 — Front panel configuration port
g
Configuration port — If desired, connect a control system
or computer to the front panel Conguration (RS-232) port.
Use an optional 9-pin D to 2.5 mm mini jack TRS RS-232
cable, part #70-335-01.
h
Primary and Redundant Power Supply LEDs —
Green — Indicates that the associated power supply is
operating within normal tolerances.
Red — Indicates that the associated power supply is operating
outside the normal tolerances or has failed. See chapter 4,
“Maintenance and Modications”, to replace the power supply.
3
Chapter Three
Remote Control
Selected SIS Commands
Installing and Starting the Control Program
Accessing the HTML Pages
FOX 4G Matrix 14400 • Installation
Installation, cont’d
2-6
FOX 4G Matrix 14400