Setup guide

NOTE:.
X1)
.=.IP.address. ###.###.###.###
X1!
.=.DHCP. . . 0.=.off,.1.=.on
X1@
.=.Verbose mode . 0.=.clear/none (default.for.Telnet.connection)
. . . . . 1.=.verbose mode (default.for.RS-232/RS-422.connection).
. . . . . 2.=.tagged.responses.for.queries.
. . . . . 3.=.verbose mode and.tagged.for.queries.
X1#
.=.Port.timeout.interval. 1.(=.10.seconds).-.65000.(default.is.30.=.300.seconds.=.5.minutes)
Command ASCII Command
(host to unit)
Response
(unit to host)
Additional description
IP setup
Set.IP.address
EX1)
CI
}
Ipi
X1)]
Read.IP.address
E
CI
} X1)]
Set.subnet.mask
EX1)
CS
}
Ips
X1)]
Read.subnet.mask
E
CS
} X1)]
Set.gateway.IP.address
EX1)
CG
}
Ipg
X1)]
Read.gateway.IP.address
E
CG
} X1)]
Set.DHCP.on.or.off
EX1!
DH
}
Idh
X1!]
Read.DHCP.on/off.status
E
DH
} X1!]
Set.verbose mode
EX1@
CV
}
Vrb
X1@]
Read.verbose mode
E
CV
} X1@]
Configure current.port.timeout
E
0*
X1#
TC
}
Pti0*
X1#]
Read.current.port.timeout
E
0TC
} X1#]
Configure global.IP.port.timeout
E
1*
X1#
TC
}
Pti1*
X1#]
Read.global.IP.port.timeout
E
1TC
} X1#]
Installing and Starting the Control Program
Another.way.to.operate the switcher.is.via.the Windows-based. Matrix.Switchers.Control.Program..This.program.is.contained.on. the Extron.Software Products.DVD.(included.with.the switcher).. Run.this.program.on.a.PC.connected.to.a.serial.port.(item
b
.and.
g
).or.Ethernet.port.(item
c
).on.the switcher..The program.must.be
installed.on.a.Windows-based.computer.and.cannot.be run.from.the DVD.
NOTE:. For.details.on.operating.the program,.refer.to.the
“Matrix.Software”.section.in.the FOX Matrix 320x and FOX Matrix 14400 User Guide.
Installing the Program
1. Insert.the DVD.into.the drive..The Extron.software DVD.window.
should.appear.automatically.
NOTE:. If.the window.does.not.open.automatically,.run.
Launch.exe from.the DVD.
2. Click.the Software.tab.
3.
Scroll.to.the Matrix.Switchers.program.and.click.I
nstall.
4. Follow.the on-screen.instructions..The installation.program.creates.
a.C:\Program.Files\Extron\Matrix_Switchers.directory.and.an. “Extron.Electronics\Matrix.Switchers”.group.folder..It.installs.the following.four.programs: •
MATRIX.Switcher+.Control.Program
• MATRIX.Switcher+.Help • Uninstall.MA
TRIX
.Switcher
• Check.for.Matrix.Updates
NOTE:. To.run.this.program.while your.computer.is.connected.to.
a.FOX.Matrix.320x.Configuration.(USB).port,.use version. 8.0.or.newer.of.the Matrix.Switchers.Control.Program.
18 FOX Matrix 320x and FOX Matrix 14400 • Remote Control
19FOX Matrix 320x and FOX Matrix 14400 • Remote Control