user manual

AVT 200HD Tuner • Operation 38
Program Guide
The translucent program guide display provides a list of the programs available on the
current channel for the day.
Figure 34. Program Guide Example
• To display the program guide, do any of the following:
• Press the Guide button on the IR remote control.
• Click the Prog Guide ON button on the Control tab of the Configuration &
Control Program. The button turns green when the Program Guide is enabled.
• Click the Program Guide On button on the Control tab, User Control web page.
• Enter the
E
1TVPG SIS command.
• To select a program using the program guide, press the up and down Shift arrow
buttons on the remote control to move the highlighting through the program list. When
a program is highlighted, the name, time period, and a brief description of the program
are displayed to the left of the program list. You can also enter SIS commands to move
the highlighting up (
E
+TVPG) or down (
E
–TVPG) through the program list.
• To close the program guide, do one of the following:
• Press the Guide button on the remote control again.
• Click the Prog Guide ON button again to remove the green highlighting (control
software).
• Click the Program Guide Off button on the User Control web page.
• Enter the SIS command
E
0TVPG.
NOTE: When you adjust the volume or change the channel (using any method), the
Program Guide closes.