User's Manual Part 2

20 Installing the Extricom WLAN System
Table 3. Extricom AP Connectors
Connectors Description
Power



External power is not required for most
applications. Power is supplied through the
Ethernet (PoE).
In case of an external power requirement by the application,
use a UL Listed LPS (Limited Power Source) or NEC Class
II adapter. Rating – Input: 90-240VAC 0.8A max. Output:
48VDC 0.56A max.
-
Due to regulatory requirements and pending
certification process for the power supply
connector - external power supply should not be
used.
WLAN RJ-45 connector – used to connect the Extricom AP to the
Extricom switch. Power is provided by the Extricom switch
to the AP when directly connected to it.
Power connector Leds WLAN
External
Antenna
Connector