User's Manual Part 1

The Extricom WLAN System User Guide 9
6. Extricom EXSW-1600 Switch
The EXSW-1600 switch is a GBE based switch, it shall support existing Access points and new
planned 802.11n Access points, the EXW-1600 posses 16 GbE copper PoE ports and is able to
aggregate up to 16 Access points.



Note that with EXSW-8000/1600, the SFP modules are not shipped with product.
You must use class 1 laser compliant with CDRH snd/or EN 60825-1
See Appendix A for approved modules
Configuring a switch and its associated set of APs is as simple as configuring a single traditional
AP, greatly reducing the effort required to deploy and maintain the WLAN.The minimal
configuration required for the switch is done via a dedicated secured Web interface.
-
The Extricom EXSW-1200 is derived from the EXSW-2400 , with the same
hardware and software. The only difference between the two models is the number
of WLAN ports supported.