User Manual

40 Configuring the Extricom WLAN System
4. Select Rogue tab for configuring Rogue AP detection and parameters (refer to Figure 20).
5. Configure Rogue AP parameters. Refer to table 11 for a description of the Rogue AP
configuration information
Figure 21 Advanced Features
Table 12. Advanced Configuration Tab
Field Description
Redundancy Status Enables designating pairs of switches, one as active and one as
standby.
Monitored IP The IP address of the other switch.
Reference IP The IP address of a reference network element. This is used to
test connectivity to the LAN.
Keep Alive Interval The interval in mSec between the Keep Alive packets.
Keep Alive Check
Threshold
The number of lost keep-alive packets before switching to the
stand-by switch.