User Manual

The Extricom WLAN System User Guide 39
Advanced Configuration of the Extricom WLAN
Architecture
The advanced configuration page of Extricom WLAN includes two tabs:


 Advanced


 Rogue
Advanced Tab
The Advanced tab includes the capability to configure the following:


 Redundancy parameters.


 SNMP parameters.
In redundancy mode, two identical switches (H/W and configuration) are installed with the same
number of connected APs.
One of the switches is configured as the Main switch, while the second is in Stand-by mode, and
can switch over as soon as the switch-over conditions are met.
Figure 18. Redundancy deployment
To configure the Advanced Features parameters:
1. Click Advanced Features in the navigation tree. The Advanced configuration page appears
(refer to Figure 19 ).
2. Select Advanced tab for configuring redundancy and/or SNMP parameters
3. Configure the redundancy, and SNMP parameters. Refer to Table 11 for a description of the
Advanced Features configuration information.
Main Stand-by