User Manual

The Extricom WLAN System User Guide 35
Field Description
LAN IP Address Enter LAN IP address used for the switch
management. You can add an alternate IP address if
you wish to manage the switch from a different
network; enter the value in the alternate field.
Network Mask Enter the network mask for the LAN 1 IP address and
you can also add an alternate network mask for the
alternate IP address defined, enter the value in the
alternate field.
Edge’s Subnet Subnet of a redundant pair (Primary - Secondary or
Main - Standby). Only appears if switch defined as
part of a redundant pair.
Default Gateway Default gateway address.
DNS server Add the DNS server IP address
VLAN Management VLAN tag ID for VLAN access to
manage the switch. You can add two: one for the
LAN 1 IP address through the Main field, and an
alternate VLAN id for the Alternate IP address
defined (using the alternate field).
Switch name A textual descriptor of the switch. Maximum length
is 64 characters.
Table 7: LAN Configuration Parameters
3. Click Save to save the configuration.
4. When using Captive Portal, if any Captive Portal ESSID has an associated VLAN, you need to
enter the IP subnet that you are planning to assign to this VLAN.



If y
ou do not
select Apply
(in the
System tool
s
web page)
after
selecting
Save
on
one page or more, when you reboot the switch the new configuration is lost. (refer
to Error! Reference source not found. on page Error! Bookmark not defined.).