User Manual

34 Configuring the Extricom WLAN System
Configuring LAN Parameters
In the LAN Configuration page, you can configure the following:


 The LAN ports’ IP address and network mask, as well as a backup address and mask.


 The LAN interface and management VLAN tag IDs.


 The default gateway.


 Wireless subnet tab – Configures all wireless subnets (SSID subnets) controlled by the IT
manager. This may be required when Captive Portal is enabled.
To configure LAN parameters:
1. Click LAN Configuration in the navigation tree. The LAN Configuration page appears (refer to
Figure 22).
Figure 22: LAN Configuration Page
2. Configure the LAN parameters. Refer to Table 7 for a description of the LAN parameters.