User Manual

The Extricom WLAN System User Guide 31
Figure 20: Login Page
4. Enter your user name and password (as provided by your system installer) and click OK. The
Summary page appears.



If you did not receive a user name and password with your switch, use the following
factory default user name and password:
user name: admin
password: Switch1
The user name and password are case-sensitive.
When System Pop-up Windows Appear In Explorer 8
1. You will receive a notice in the pop-up window that there is a problem with the website’s
security certificate.
2. Press the tab key on your keyboard until you see the link “Continue to this website (not
recommended)”
3. Click on it.
System pop-up windows are used in only a few situations, for example, when clicking on System
Tools \Maintenance \Factory Defaults button.
Using the Extricom Web Configuration Pages
The Extricom Web Configuration pages have four main areas:


 Switch image – The Extricom Web configuration page displays an image of the configured
switch (the EXSW400, EXSW800, EXSW-1200, Multiseries 1000, or the EXSW-2400); the
image shows dynamic status of the PoE of each AP port (grey= PoE off , green=PoE on).


 Navigation tree