User Manual

24 Configuring the Extricom WLAN System
Configuring the LAN Parameters
In the LAN Configuration page, you can configure the following:
The LAN IP address and network mask, as well as a backup address and mask.
The LAN interface VLAN tag IDs.
The default gateway.
The address of the System Log and how often (if at all) the log is written to.
The address of the Monitor Log and how often (if at all) the log is written to.
.
To configure the LAN parameters:
1. Click LAN Configuration in the navigation tree. The LAN Configuration page appears (refer to
Figure 15).
Figure 15. LAN Configuration Page