R Painted Steel Cabinet Manual TXPIT7009BK TXPIT7009BL TXPIT7009RD Extreme Tools Inc.
Parts List 1 2 28 3 25 24 29 23 4 22 21 5 20 6 11 7 19 12 26 18 8 16 17 15 9 27 14 13 Ref # Description Part # Qty 1 Lock and Key (1201-1204) 304007 1 2 Shelf 218860 2 3 Shelf Support 203902 8 4 M4x5mm Phillips Hex Bolt 320060 4 5 Trim Set 315044-315045 1 6 Trim 315747 2 7 Trim 315049 7 8 Drawer Pull 301743 7 9 Drawer Liner 550805 7 10 Shelf Liner 550843 4 11 Slide Set 300176-300177 10 12 Door Pull 301647 2 13 M10 Cap Nut 323050 16 14
17 Spring Washer 324053 4 18 M10x30mm Hex Bolt 321046 4 19 Positioning Rubber 314150 6 20 Control Handle 108388 1 21 Handle Sleeve 314149 2 22 Brake Mechanism 317010 1 23 Trim 315046 2 24 Work Top 109460 1 25 Drawer 109461 4 26 Drawer 109462 2 27 Drawer 109463 1 28 Caliper 317010-C 1 29 Rotor 317010-F 1 Tools Required for Assembly · 16mm Wrench Assembly Control Handle Attachment After removing the pit cart from the package, install the control handle as s
Operation Moving the Pit Cart Brake unlock: to unlock the brake release the hook downward Brake lock: to lock the brake slide hook over the bolt Drawer Removal Pull the drawer out so that it’s almost fully extended. Push up on the black release lever on one side, while pulling down on the black release lever on the other side. PUSH UP (RIGHT HAND SIDE) While holding the levers in the positions as instructed above, pull the drawer outward until it is released from the drawer slide.
Safety WARNING Do not attempt to lift the unit by its side handles using chains, ropes or lifting devices, if two people cannot lift the unit. Use a forklift placed under the bottom of the unit if this situation occurs. The side handle may fail, which may cause personal injury or damage to the product. Lock the drawers before moving this product. The drawers could come open and make the product unstable and tip, which may cause personal injury or product damage.
