Instructions / Assembly
Table Of Contents
THD552112RC PARTS LIST
SAFETY
~ The load capacity of the side handles
used on all 55” and 72“ chests is 500 lbs.
when used in tandem.
~ DO NOT aempt to li, by the side
handles, the 55” or 72” chests using handles, the 55” or 72” chests using
chains, ropes or other liing devices if
two persons cannot li the chest. Use a
forkli placed under the boom of the
chest if this situaon occurs. The side
handle may fail, which may cause
personal injury or damage to the
product.product.
~ DO NOT stand on this product or lean
on work top.
~ WEAR SAFETY GLASSES when removing
or reposioning the slides. The
tool could slip which may cause personal
injury.
~ When moving this product, do not pull
it. Push the product to prevent personal
injury.
~ USE THE BRAKES when not moving this
product. This will prevent the product
from rolling, which may cause personal
injury or product damage.
~ ~ DO NOT OPEN more than one drawer
at a me. Otherwise, the product may
become unstable and p, which may
cause personal injury or product damage.
~ DO NOT mount this product on a truck
bed or any other moving object. This may
cause personal injury or product damage.
~ ~ Secure this product properly before
moving it with a forkli.
~ DO NOT tow with power equipment.
The product could p, which may cause
personal injury or product damage.
~ DO NOT alter this product in any
manner. For example, do not weld
external lockbars or aach electricalexternal lockbars or aach electrical
equipment. This may cause product
damage or personal injury.
~ Keep the product on level surfaces.
The product may become unstable
and p if stored or moved on an
un-level surface, which may cause
personal injury or product damage.
~ ~ When the cover is opened, be sure
the cover top is in the locked
posion.This will prevent accidental
closure and personal injury.
~ ~ BE CAREFUL when closing the
cover.Remove hands before the cover
closes completely to prevent personal
injury.
~ ~ The maximum weight for each
drawer should be no more than 45kg
(100lbs) for single slides or 90kg
(200lbs) for double slides.
~ ~ The maximum product weight,
including contents, should be no
more than 1,400 kgs (3,000 lbs) for
roller cabinets.
~ ~ Close the cover and lock the
drawers before moving this product.
The drawers could come open and
make the product unstable and p,
which may cause
personal and product damage.
~ ~ Remove the work top from the
roller cabinet before mounng the
chest.
~ Failure to do so may cause the
chest to slide off, which may cause
personal injury or product damage.
~ ~ IMPORTANT: Do not aach or
mount this product to a vehicle.
Mounng this product to any vehicle
in any manner will void warranty.
~ ~ IMPORTANT: Detents are intended
to keep drawers closed when tool
box is staonary. Detents are not
intended to keep drawers closed
whtn moving. TOOL BOX MUST BE
LOCKED USING KEY WHEN MOVING.