Instructions / Assembly

Drawer Replacement
a. BE SURE BRAKES ARE ENGAGED
ON ALL CASTERS!
b. NOTE: This step requires 2 adults to
complete safely.
Flip the tool cart into its upright position.
c. Unlock the lid. Starting at the bottom,
extend the drawer slides. Align the
brackets on the sides of the drawers with
the slots in the extended slides. Insert the
brackets onto the slides being careful to
keep the two sides evenly positioned.
d. Once properly inserted, completely
close the drawer to set the slides in their
proper positions.
e. Repeat the above procedure for each
drawer.
Handle and Bumper
Installation
NOTE: The handle can be
installed on either side of the
tool cart.
a. Position the handle over the
holes on the side of the cart.
Use four (4) M6-1.0 x 12 Socket
Head Screws (Part# 7) to attach
handle. Tighten securely.
b. Using six (6) Black M8-1.25
x 14 Machine Screws (Part #
12) to attach a bumper to each
corner of the cart. Tighten all
screws securely.