Manualshelf

Instructions / Assembly

ManualsBrandsExtreme Tools ManualsTool ChestsDX 72 in. 0-Drawer Extreme Power Workstation Hutch in Matte Black with Black Handle
12345678910
“J” end of J-Connector
Front
Back
J-Connector installation into trim
piece on roller cabinet
Insert M8 Hex Bolt through
“L” bracket hole and
into threaded insert of
J-Connector.
Insert M8 Hex Bolt through
top of the “L” Bracket and
screw into the top of the
threaded insert of the
J-Connector.
Attach the side mounting
bracket through the opening
on side panel. Use Flat
Washer and M8 Bolt to
secure to the roller cabinet.
Side mounting
bracket secures
side panel to roller
cabinet
STEP 3 - Install Left Side Panel Assembly
a. Insert the “J” end of the J-Connector into the rectangular opening at the top of the trim of the roller
cabinet where the end cap was removed. The “J” end of the connector should be facing the body of
the tool box. The top end with the threaded insert should be oriented to the front of the trim.
b.
c.